Edaq

Items 1 to 40 of 69 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction
  1. qUAD pH isoPod™ with USB

    qUAD pH isoPod™ with USB

    €920.04

    Four channel, electrically isolated, compact signal conditioner with a USB connection for continuous monitoring most pH, ion selective and oxidation/reduction potentiometric (ORP) electrodes.
    • Use with up to 4 electrodes
    • Electrically isolated
    • USB connection to computer
    • Use with Pod-Vu or LabVIEW software
    Learn More
  2. Single-channel Chromatography Data Collection System

    Single-channel Chromatography Data Collection System

    €1.00

    PowerChrom Recording and Integration System for Chromatography - Including GC HPLC and IC
    • Collect, display and analyse chromatography data
    • Upgrade your GC, HPLC or IC
    • One detector with 24 bit resolution
    Learn More
  3. Two-channel Chromatography Data Collection System

    Two-channel Chromatography Data Collection System

    €1.00

    PowerChrom Recording and Integration System for Chromatography - Including GC HPLC and IC
    • Collect, display and analyse chromatography data
    • Integrate peaks automatically or manually
    • Upgrade your GC, HPLC or IC
    • Support for one or two detectors with 24 bit resolution
    • Control fraction collectors and auto-injectors
    • Record tabs of data in a master file rather than individual files.
    • Full reports available within software
    • Copy/paste compatibility with most software (images or data).
    Learn More
  4. High Voltage Sequencer for Microchip Electrophoresis

    High Voltage Sequencer for Microchip Electrophoresis

    €1.00

    Four channel voltage source for microchip electrophoresis, and electrokinetic chromatography.
    • Up to ±3000 V at 150 μA
    • Four high voltage outputs
    • Monitor current and voltage
    • USB Serial communication
    Learn More
  5. Platinum Plate Electrode with glass body

    Platinum Plate Electrode with glass body

    €181.17

    This platinum plate electrode can be used as an anode, cathode, or auxiliary electrode in many types of electrochemistry experiment.
    It features a glass body for good chemical resistance. Learn More
  6. Pt-coated titanium wire electrode, 150mm long

    Pt-coated titanium wire electrode, 150mm long

    €46.18

    This electrode is a titanium rod with a 2.5 micron thick coating of platinum.
    It is very resistant to corrosion and so can be used as a miniature anode (or cathode), or auxiliary electrode in many electrochemistry experiments. Learn More
  7. Kanichi Screen Printed Electrode Adaptor

    Kanichi Screen Printed Electrode Adaptor

    €109.40

    This adaptor accepts eDAQ Kanichi screen printed electrodes (ET090, ET091, ET092, ET093, ET094, ET095) for mounting in ET080 reaction vessels (also ET014).
    Equipped with sockets for 2 mm pins, and studs for miniature alligator clips. Suitable for the electrode leads of all eDAQ potentiostats. Learn More
  8. Kanichi Carbon SPE - Pack of 40

    Kanichi Carbon SPE - Pack of 40

    €152.74

    This SPE (screen printed electrode) features a graphitic carbon working electrode, along with a carbon auxiliary electrode and Ag/AgCl reference.
    These electrodes are disposable and are meant to be replaced if fouling occurs.
    Each new electrode affords a clean and reproducible surface. Learn More
  9. pH Electrode - Tuff Tip

    pH Electrode - Tuff Tip

    €109.40

    A combination pH electrode featuring an easy to clean Magna-Flow® reference junction and a durable Tuff-Tip® pH bulb. These features make this electrode an excellent alternative to conventional pH electrodes where there is a risk of bulb breakage, such as during laboratory classes.
    Suitable for use with the EPU353 pH & ISE isoPod. Learn More
  10. Redox Electrode

    Redox Electrode

    €195.38

    A combination redox electrode (oxidation/reduction potential, ORP, electrode), featuring an easy to clean double junction and a platinum wire sensor.
    Suitable for use with the EPU353 pH & ISE isoPod Learn More
  11. pH Electrode

    pH Electrode

    €211.00

    A combination pH electrode, featuring an easy to clean double junction. This feature enables the electrode to be used in low ionic strength solutions, messy and biological samples.
    Suitable for use with the EPU353 pH & ISE isoPod. Learn More
  12. Pt-coated titanium wire electrode, 70 mm long

    Pt-coated titanium wire electrode, 70 mm long

    €42.62

    This electrode is a titanium rod with a 2.5 micron thick coating of platinum.
    It is very resistant to corrosion and so can be used as a miniature anode (or cathode), or auxiliary electrode in many electrochemistry experiments. Learn More
  13. Micro Oxygen Electrode (0.3 mm diameter)

    Micro Oxygen Electrode (0.3 mm diameter)

    €550.61

    This is our smallest diameter micro-oxygen electrode for insertion into the narrowest enclosures, and features a highly flexible tip.
    Can be used with an EP354 isoPod to connect to an e-corder, or with EPU354 USB isoPod for direct USB connection to a computer..

    Specifications

    • Connector: BNC
    • Length: 40 mm (electrode body), 450 mm (cable)
    • Diameter: 300 µm total, 200 µm (working electrode), 100 µm (reference electrode)
    Learn More
  14. Polarographic Oxygen Electrode

    Polarographic Oxygen Electrode

    €166.96

    A traditional polarographic (Clark style) oxygen electrode for chemical or biological applications. The electrode must be attached to an oxygen meter/preamplifier that polarises the platinum cathode to about -0.8 V with respect to the anode while measuring the current flow. Supplied with magnetic stirbar and spare membrane.

    Specifications

    • Typical signal: 400 ± 75 nA in air saturated water at 25°C
    • Response time: 0 – 98% of full response in less than 60 s at 25°C
    • Cathode: Platinum
    • Anode: Silver
    • Body: ABS plastic, 12 mm dia x 120 mm long
    • Connector: BNC, cable 1m
    Learn More
  15. Membrane Housing Kit for ET1120

    Membrane Housing Kit for ET1120

    €188.27

    Replacement membrane housing kit for the ET1120 Micro-oxygen electrode.

    Includes

    • 6 replacement Teflon membranes
    • a bottle of electrolyte solution
    • a bulb pipette
    • 5 polishing pads
    Learn More
  16. Chromatography Data Collection Software

    Chromatography Data Collection Software

    €1.00

    PowerChrom software is used for the collection, display and analysis of chromatographic and similar signals.
    • Turns your computer into a chromatography data workstation
    • No programming required - just plug and play
    • Collect signals from one or two detectors
    • Use with ER180 PowerChrom hardware or any Edaq data recorder
    Learn More
  17. ER225  Contactless Conductivity Data System

    ER225 Contactless Conductivity Data System

    €1.00

    Contactless Conductivity Data System for Electrophoresis and Chromatography
    • Contactless conductivity detector and data recorder
    • Used with a range of electrophoresis and chromatography techniques
    • No programming required – just plug and play
    • Includes software for data collection and analysis
    • Connects to chip or capillary headstages
    Learn More
  18. C4D Headstage for Capillary Electrophoresis

    C4D Headstage for Capillary Electrophoresis

    €1.00

    C4D Headstage for Capillary Electrophoresis
    • Compatible with most capillary electrophoresis instruments
    • Use with silica or plastic capillary (350 to 385 μm OD)
    • Compatible with all eDAQ C4D units
    • Internal electrodes never require maintenance or cleaning
    Learn More
  19. Electrode polishing kit

    Electrode polishing kit

    €209.87

    Electrode polishing kit Learn More
  20. Potentiostat

    Potentiostat

    €1.00

    Modular potentiostat
    4 modes: potentiostat, galvanostat, ammeter and voltmeter
    For use with an Edaq e-corder data acquisition unit.
    Learn More
  21. QuadStat

    QuadStat

    €1.00

    Four-channel potentiostat 10mA to 20pA range
    Separate/common reference and auxiliary electrodes
    BiPotentiostat
    Ideal for amperometric biosensors, microbial fuel cells, photovoltaic materials and neurochemistry
    For use with an Edaq e-corder data acquisition unit. Learn More
  22. Dual PicoStat

    Dual PicoStat

    €1.00

    High sensitivity 2 channel potentiostat
    Bipotentiostat and 4-electrode modes of operation
    For use with an Edaq e-corder data acquisition unit. Learn More
  23. Electrochemistry Waveform Generator

    Electrochemistry Waveform Generator

    €1.00

    Produces slow, stable programmable ramps and pulses for potentiostats.
    Control from Chart software or by serial commands.
    Manual pause/resume/reverse controls.
    Compatible with many brands of potentiostat. Learn More
  24. Single-channel Potentiostat/Galvanostat/EIS System

    Single-channel Potentiostat/Galvanostat/EIS System

    €1.00

    Economic high quality potentiostat/galvanostat/impedance analyzer Learn More
  25. Integrated Potentiostat

    Integrated Potentiostat

    €1.00

    Stand-alone potentiostat
    Ideal for cyclic voltammetry, linear sweep and pulse techniques
    Potentiostat, galvanostat, ZRA and electrometer modes
    Down to picoamp resolution
    Maximum 100 mA and ±10 V
    Learn More
  26. tethaPatch

    tethaPatch

    €1.00

    The tethaPatch™ is designed for use with a tethaPlate™ for patch-clamp style experiments with a ER466 Potentiostat system on tethered membrane preparations.
    The six separate chambers of the tethaPlate can be addressed individually for convenient replicate experiments, or separate experiments can be performed in each chamber. Learn More
  27. Dual Reference Adaptor

    Dual Reference Adaptor

    €1.00

    Converts a three-electrode potentiostat into a 4-electrode potentiostat for use with two reference electrodes. Learn More
  28. RTD Temperature Probe

    RTD Temperature Probe

    €68.08

    A high accuracy (Class AA) 1000 ohm RTD temperature probe suitable for use with the EPU358 USB RTD/Thermistor isoPod. Learn More
  29. Thermistor Temperature Probe

    Thermistor Temperature Probe

    €55.77

    Thermistor Temperature Probe suitable for use with the EPU358 USB RTD/Thermistor isoPod. Learn More
  30. General Purpose T-type Thermocouple Probe

    General Purpose T-type Thermocouple Probe

    €147.78

    A general purpose temperature probe for use in liquids, gasses and semi-solids.
    It features a plastic handle, a 75 mm long stainless steel shaft and a T-type copper/constantan junction.
    It is suitable for use with the EPU356 Thermocouple isoPod with USB. Learn More
  31. IC/HPLC C4D Detector Headstage

    IC/HPLC C4D Detector Headstage

    €332.49

    C4D Headstage for Ion Chromatography, HPLC
    • Conductivity detector for IC, HPLC and FIA
    • Conductivity range: 150 µS/cm to 15 mS/cm
    • Excellent peak resolution
    • Made to fit tubing with 1/16 inch (1.6 mm) outer diameter
    • Compatible with all eDAQ C4D units
    • Internal electrodes never require maintenance or cleaning
    Learn More
  32. General Purpose C4D Monitor Headstage

    General Purpose C4D Monitor Headstage

    €332.49

    General Purpose C4D Monitor Headstage
    • General purpose conductivity monitor
    • Measures a wide range of conductivities
    • Made to fit tubing with 1/16 inch (1.6 mm) outer diameter
    • Compatible with all eDAQ C4D units
    • Internal electrodes never require maintenance or cleaning
    Learn More
  33. Micro Oxygen Electrode

    Micro Oxygen Electrode

    €550.61

    The Micro Oxygen Electrode is a Clark style polarographic oxygen electrode. Its small size (and low oxygen consumption) is suited to measuring oxygen concentration in small volumes of solution. It must be used with a suitable amplifier such as the EP354 dO2 isoPod or EPU354 dO2 USB isoPod.

    Specifications

    • Connector: BNC
    • Size: 3 mm OD at tip x 86 mm long
    • Response time: <20 s
    • Signal: 1.7 nA in air at 25 °C
    • Oxygen consumption: 4.4 fmol O2/s in air at 25 °C
    Learn More
  34. Galvanic Oxygen Electrode

    Galvanic Oxygen Electrode

    €138.53

    The Galvanic Oxygen Electrode uses a sacrificial lead anode to drive an electrochemical reaction reducing oxygen at a platinum cathode. The signal is proportional to oxygen concentration. The electrode can be directly connected to the input of any e-corder model.

    Specifications

    • Signal: 25 - 35 mV in air-saturated water at 25 °C
    • Oxygen consumption: 0.345 pmol O2/s per mV of signal
    • Drift: <2% per week at constant temperature and pressure
    • Response time: <30 s to 90% of final value at 25 °C
    • Body diameter: 12 mm
    Learn More
  35. RTD/Thermistor isoPod™ with USB

    RTD/Thermistor isoPod™ with USB

    €316.87

    Electrically isolated, compact signal conditioner with a USB/virtual serial port connection for continuous recording of temperature from suitable platinum RTD or NTC thermistor probes. Learn More
  36. Thermocouple isoPod™ with USB

    Thermocouple isoPod™ with USB

    €390.75

    Electrically isolated, compact signal conditioner with a USB/virtual serial port connection for continuous recording of temperature from thermocouple probes Learn More
  37. Biosensor isoPod™ with USB

    Biosensor isoPod™ with USB

    €539.23

    Electrically isolated, compact signal conditioner with a USB/virtual serial port connection for continuous monitoring of low current amperometric sensors. Learn More
  38. Nitric Oxide isoPod™ with USB

    Nitric Oxide isoPod™ with USB

    €645.09

    Electrically isolated, compact signal conditioner with a USB/virtual serial port connection for continuous monitoring polarographic (Clark–style) nitric oxide electrodes. Learn More
  39. pH & ISE isoPod™ with USB

    pH & ISE isoPod™ with USB

    €316.87

    Electrically isolated, compact signal conditioner with a USB/virtual serial port connection for continuous monitoring most pH, ion selective and oxidation/reduction potentiometric (ORP) electrodes. Learn More
  40. Quad Multi Function isoPod™

    Quad Multi Function isoPod™

    €1,417.39

    Four channel isoPod USB electrically isolated sensor meter. Each channel can be configured for a different sensor. Learn More

Items 1 to 40 of 69 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction