uProcess™ Automated Pumps, Valves and Sensors

uProcess™ Automated Pumps, Valves and Sensors

The LabSmith breadboard-based uProcess™ automated syringe pumps, valves, pressure and temperature sensors are part of the uProcess microfluidics automation system of software and hardware products which provides simple, straightforward automated routing of microfluidic volumes.

uProcess automated devices work together with CapTite™ microfluidic interconnect products to make it easy to build and rebuild micro- and nano-fluidic circuits. All products are inter-compatible and quick to assemble, taking the hassle out of fluid routing and control.

SPS01 Syringe PumpSPS01 Programmable Syringe Pumps deliver volumes up to 100 microliters, with resolution as low as 2 nanoliters. The pump body design allows syringes to be easily removed and replaced, providing a wide range of volumes with a single pump.
AV201 automated valveAutomated Selector Valves provide 2-position, 3, 4 or 6-port switching, with near-zero dead volumes and low swept volumes and a switching time at just 0.4 seconds.
Miniature pressure sensors fit into any CapTite port to measure fluid pressure for monitoring or control with very low dead volume.


Temperature sensors. K-type bare or insulated thermocopuples that fits to the 4AM analog sensor module.


Heater/cooler units. Peltier elements for cooling or heating. Connects to the 4PM 15W miniature power driver module.


uProcess Software provides a simple interface for configuring and controlling uProcess pumps and valves and for creating automated processes for coordinated control.
uPB breadboards provides a compact, stable mechanical mounting platform for uProcess devices and microfluidic chips, tied together with CapTite flow routing and interconnect components.

All uProcess devices are connected through a common bus on the uPB Breadboard to an interface box, communicating with the software through a USB interface. One control interface can sequence and coordinate more than 30 devices, and breadboards can hold 5, 8 or 12 devices each.

24 Item(s)

per page

List  Grid 

Set Descending Direction
  1. Automated 3 port Valve

    Automated 3 port Valve

    From: €611.28

    To: €652.03

    AV201 Automated Valves.
    Two-position three-port automated valves. Available for 360um capillary, 1/32" tubing or 1/16" tubing. Requires a 4VM valve manifold and EIB controller for communicating with PC. Connects to capillary or tubing via one-piece fitting (not included). Learn More
  2. uTS Temperature sensors

    uTS Temperature sensors

    From: €89.11

    To: €106.97

    LabSmith uTS-series temperature sensors.
    The uTS can be used alone for on-chip or in-fluid temperature monitoring, or with the uTE-series thermal-electric module for complete temperature control. Controlled using the LabSmith uProcess software suite or LabView, the uTS and uTE precision thermal management products are a perfect compliment to LabSmith's complete monitoring and control of microfluidic systems.
    The uTS-series temperature sensors require a 4AM01 sensor manifold and EIB200 USB interface.
    • Temperature range: -150 – 200° C
    • Sensor type: K-type thermocouple
    • Accuracy: 0.5° C
    • Precision: 0.001° C
    Learn More
  3. uTE Thermal-Electric Module

    uTE Thermal-Electric Module

    €147.72

    LabSmith uTE-series thermal-electric module.
    The uTE module is used for heating or cooling your microfluidic application. The module can be coupled with a uTS temperature sensor for precision thermal monitoring and control using LabSmith's uProcess software.
    The uTE-series thermal-electric modules require a 4PM01 Power Manifold and EIB200 uprocess interface. A uTS temperature sensor is recommended for monitoring and control of the uTE module.
    Learn More
  4. uProcess Power Manifold

    uProcess Power Manifold

    4PM01 uProcess Power Manifold.
    Power manifold for automatable and closed-loop control of up to 4 uTE thermal-electric modules or other loads using the LabSmith uProcess software.
    Includes 4 flat flex ribbon cables (1 x 8", 2 x 10", 1 x 12").
    • Voltage range: –5 to 5 V
    • Current range: -4 to 4 A
    • Maximum Power: 15 W
    • Dimensions: 2.1" x 1.0" x 0.5" (54 mm x 26 mm x 13 mm)
  5. Continous dispense syringe package

    Continous dispense syringe package

    Includes components for a continuous dispensing setup for use with 360um OD capillary. Learn More
  6. Automated 6 port Valve. For use with 360um capillary

    Automated 6 port Valve. For use with 360um capillary

    AV203 Automated Valve
    Two-position six-port automated valve with "III" shaped flow pattern. For 360um capillary. Requires a 4VM valve manifold and EIB controller for communicating with PC. Connects to tubing via C360-100 one-piece fittings (not included).
    Learn More
  7. Automated 4 port Valve

    Automated 4 port Valve

    €713.15

    AV202 Automated Valve
    Two-position four-port automated valve with "II" shaped flow pattern. Available for 360um or 1/32" tubing size. Requires a 4VM valve manifold and EIB controller for communicating with PC. Connects to capillaries/tubing via one-piece fittings (not included).
    Learn More
  8. USB uProcess Electronic Interface Controller

    USB uProcess Electronic Interface Controller

    EIB-200 USB Electronic Interface Controller.
    Controls over 100 uDevices for sequential operation and up to 10 uDevices for simultaneous operation. Includes uProcess software, power supply, micro USB 2.0 cable, and flat ribbon connection cable. Compatible with uProcess Software versions 1.24.4 and later. Learn More
  9. Flat Flex Ribbon Cables

    Flat Flex Ribbon Cables

    From: €10.19

    To: €26.49

    Flat flex ribbon cables for uProcess valves and sensors Learn More
  10. LabPackage uProcess Kit

    LabPackage uProcess Kit

    From: €6,331.79

    To: €6,530.46

    uProcess™ kits offer convenient packages for setting up your microfluidic laboratory. The kits include pumps, valves, pressure sensors, temperature control components and associated mounting and control hardware and software. Learn More
  11. uProcess Kit

    uProcess Kit

    From: €4,986.99

    To: €5,099.05

    uProcess™ kits offer convenient packages for setting up your microfluidic laboratory. The kits include pumps, valves, pressure sensors, temperature control components and associated mounting and control hardware and software. Learn More
  12. Pressure Sensor Starter Package

    Pressure Sensor Starter Package

    €952.57

    The uProcess™ product line is a modular breadboard platform for researchers to create and control microfluidic circuits. The uProcess™ software allows the user to program sequences of valve and syringe pump actuations. Products interface directly with LabSmith’s CapTite™ Microfluidic Products.
    The Pressure Sensor Starter Package includes two sensors and all necessary hardware and control software.
    Please select choice of 250kPa or 800kPa sensors in order comment. Learn More
  13. uPS Pressure Sensor

    uPS Pressure Sensor

    From: €147.72

    To: €178.29

    Miniature pressure sensors for the line of uProcess™ flow control devices. The uPS can be installed in any LabSmith CapTite™ fitting and is ideal for accurate, low-dead volume pressure monitoring and control of microfluidic systems. Learn More
  14. Valve Starter Package

    Valve Starter Package

    From: €1,747.23

    To: €1,833.83

    The uProcess™ product line is a modular breadboard platform for researchers to create and control microfluidic circuits. The uProcess™ software allows the user to program sequences of valve and syringe pump actuations. Products interface directly with LabSmith’s CapTite™ Microfluidic Products. The Valve Starter Package includes two valves and all necessary hardware and control software. Learn More
  15. Syringe Starter Kit

    Syringe Starter Kit

    €1,120.67

    The uProcess™ product line is a modular breadboard platform for researchers to create and control microfluidic circuits. The uProcess™ software allows the user to program sequences of valve and syringe pump actuations. Products interface directly with LabSmith’s CapTite™ Microfluidic Products. The Syringe Starter Package includes one syringe pump and all necessary hardware and control software. Learn More
  16. RS232-USB adapter

    RS232-USB adapter

    €20.99

    RS232-to-USB adapter. Creates a virtual COM port on A USB port. Includes software driver. Learn More
  17. uProcess Sensor Manifold

    uProcess Sensor Manifold

    4AM01 uProcess Sensor Manifold.
    Analog manifold for controlling up to 4 sensors using the LabSmith uProcess software.
    Includes 4 flat cables for 4 devices. Learn More
  18. Manifold for Valve Control

    Manifold for Valve Control

    4VM01 Manifold for Valve Control
    Manifold connects and controls up to 4 automatic valves. Mounts to uProcess Breadboards (uPB-5, uPB-8, or iBB).
    Includes 4 flat cables for 4 devices. Learn More
  19. Syringe Pump

    Syringe Pump

    €850.69

    SPS01 Syringe Pump.
    SPS01 syringe pump with 1 syringe glass and plunger set. Requires an EIB controller for communicating with PC. Connects to capillary or tubing via one-piece fitting (not included). Learn More
  20. Syringe Glass & Plunger Set

    Syringe Glass & Plunger Set

    €101.88

    Syringe glass and plunger set SG-XXX-C360 connects to 360 um OD tubing using C360-100. SG-080-T116 connects to 1/16" OD tubing using T116-100. Connects to one piece fitting (not included). Learn More
  21. Breadboard Reservoir

    Breadboard Reservoir

    From: €61.13

    To: €76.41

    Reusable PEEK™ reservoirs available in 1.1ml or 5ml volume. Mounts to LabSmith breadboards. Learn More
  22. uPB-08

    uProcess Breadboard

    From: €86.60

    To: €326.01

    Breadboard for mounting uProcess devices. Available with 5 or 8 device connections. Material: Fiberglass Learn More
  23. Syringe/plunger installation tools

    Syringe/plunger installation tools

    Syringe/plunger installation tools. Includes hex tool for syringe plunger removal/installation and hex wrench to secure syriinge glass. Learn More
  24. Breadboard mounting hardware and tools

    Breadboard mounting hardware and tools

    Breadboard mounting hardware and tools. Includes TORX T7 wrench, hex wrench, screws for mounting 10 valves or reservoirs and 5 interconnects to breadboard, plus 4 chip clips and 8 electrode clips for mounting chips and electrodes to the iBB (integrated breadboard). Learn More

24 Item(s)

per page

List  Grid 

Set Descending Direction